Study on energy release characteristics of reactive material casings under explosive loading

Reactive Materials (RMs), a new material with structural and energy release characteristics under shock-induced chemical reactions, are promising in extensive applications in national defense and military fields. They can increase the lethality of warheads due to their dual functionality. This paper focuses on the energy release characteristics of RM casings prepared by alloy melting and casting process under explosive loading. Explosion experiments of RM and conventional 2A12 aluminum alloy casings were conducted in free field to capture the explosive fireballs, temperature distribution, peak overpressure of the air shock wave and the fracture morphology of fragments of reactive material (RM) warhead casings by using high-speed camera, infrared thermal imager temperature and peak overpressure testing and scanning electron microscope. Results showed that an increase of both the fireball temperature and air shock wave were observed in all RM casings compared to conventional 2A12 aluminum ally casings. The RM casings can improve the peak overpressure of the air shock wave under explosion loading, though the results are different with different charge ratios. According to the energy release characteristics of the RM, increasing the thickness of RM casings will increase the peak overpressure of the near-field air shock wave, while reducing the thickness will increase the peak overpressure of the far-field air shock wave.     

Chain damage effects of multi-spaced plates by reactive jet impact

Chain damage is a new phenomenon that occurs when a reactive jet impacts and penetrates multi-spaced plates.The reactive jet produces mechanical perforations on the spaced plates by its kinetic energy(KE),and then results in unusual chain rupturing effects and excessive structural damage on the spaced plates by its deflagration reaction.In the present study,the chain damage behavior is initially demonstrated by experiments.The reactive liners,composed of 26 wt％Al and 74 wt％PTFE,are fabricated through a pressing and sintering process.Three reactive liner thicknesses of 0.08 CD,0.10 CD and 0.12 CD(charge diameter)are chosen to carry out the chain damage experiments.The results show a chain rupturing phenomenon caused by reactive jet.The constant reaction delay time and the different penetration velocities of reactive jets from liners with different thicknesses result in the variation of the deflagration position,which consequently determines the number of ruptured plates behind the armor.Then,the finite-element code AUTODYN-3D has been used to simulate the kinetic energy only-induced rupturing effects on plates,based on the mechanism of behind armor debris(BAD).The significant discrepancies between simulations and experiments indicate that one enhanced damage mechanism,the behind armor blast(BAB),has acted on the ruptured plates.Finally,a theoretical model is used to consider the BAB-induced enhancement,and the analysis shows that the rupturing area on aluminum plates depends strongly upon the KE only-induced pre-perforations,the mass of reactive materials,and the thickness of plates.     

知识图谱的预警探测体系探测效能贝叶斯评估方法

战争中,预警探测体系作为典型的复杂系统,其探测效能发挥情况的有效评估一直是亟需人们研究解决的重要现实问题.突破了传统效能评估方法的局限,在分析了知识图谱技术、贝叶斯评估方法基本原理的基础上,提出了基于两者综合运用的预警探测体系探测效能评估新方法,利用专家知识和实验数据构建知识图谱,并进一步使用贝叶斯网络方法实施知识推理...     

舰空导弹武器系统射击效能计算模型

针对当前空中来袭目标的主要特点,为有效评估舰空导弹武器系统对目标的射击效果,需要进行舰空导弹武器系统射击效能评估计算模型的初步研究。通过射击效能指标的选取和对目标的分析,并且根据多年来舰空导弹武器发展建设和作战运用的实际需求,在综合研究国内外多种效能评估理论和方法的基础上建立了舰空导弹对目标射击效能评估的计算模型并分析了射击效能指标的主要影响因素。该射击效能模型的初步研究,既可以使计算结果更加科学、全面、客观,同时对于其他武器系统射击效能的研究也有一定的借鉴作用。     

基于SEA的舰载C3I系统防空作战效能评估模型

现代海战中,空中目标对舰艇的威胁越来越大,舰艇的防空作战能力已成为衡量其综合作战能力的主要指标。而C3I系统作为舰艇的指挥中枢,其性能直接决定着舰艇防空作战的成败。根据现代海战中空中目标的武器作战使用方式,并针对SEA方法的要求,提出了评估C3I系统在防空作战时系统效能的三个主要性能量度(MOP),通过分析C3I系统在防空作战时的特点,建立了评估C3I系统防空作战效能的SEA方法模型。并利用该模型比较了不同的C3I系统的作战效能,对结果进行了简要分析,证明了SEA方法模型对舰载防空C3I系统进行效能评估的可行性。     

固体火箭发动机二次喷射控制矢量喷管流场仿真

采用基于Favre平均的三维N-S方程和k-ε湍流模型对固体火箭发动机二次喷射推力矢量喷管复杂干扰内流场进行数值模拟。空间上采用三阶精度差分格式进行求解,时间上采用隐式Jacobi点迭代方法进行迭代推进,直至流场收敛。数值模拟得到矢量喷管二次射流的激波系结构,以及复杂的主/次流干扰流动图像。二次喷射流场包含复杂的涡系结构和波系结构,还存在着边界层与激波的相互干扰、自由剪切层、激波、膨胀波和大尺寸分离。数值模拟还表明,高温燃气射流导致喷射孔附近喷管壁面处的温度相当高,需采取相应的热防护措施。     

基于ForCES体系结构的IPv6路由器的研究与实现

分析了开放网络体系结构研究现状,并在ForCES体系框架下提出一个OpenRouter路由器结构模型,该模型由四个逻辑层次组成,三个标准的API对路由器进行功能模块化分离,使标准模块化路由器实现成为可能。在此基础上,重点介绍了遵从OpenRouter结构模型的IPv6路由器系统的实现及关键技术。     

Si3 N4基复相陶瓷天线罩材料的制备及性能

基于高马赫数导弹天线罩为应用背景,以Si粉、BN粉、SiO2粉为主要原料,采用反应烧结法制备Si3N4基复相陶瓷材料,探讨了原料组成、成型工艺及坯体密度对材料性能的影响。试验结果表明:当原料中Si、BN和SiO2分别为55%、30%和10%时,材料强度可达96.7MPa,断裂韧性可达1.80MPa.m1/2。同时材料具有良好的介电性能及热物理性能。     

新型驱护舰编队舰空导弹防御体系射击效能研究

针对新型驱护舰编队舰空导弹防御体系射击效能评估这一难题,对其射击效能准则进行了确立,提出了基于排队论的射击效能评估模型,对体系射击效能进行仿真计算,总结出能对系统射击效能做出准确评估的方法,并利用实例对模型进行了验证。     

目标辐射噪声线谱的特征建模与检测

在理论分析的基础上,构造了基于λ水平能量聚点的目标辐射噪声线谱的特征量模型.在利用中值滤波去除信号功率谱中“平台型”的λ水平能量聚点后,计算其λ水平能量聚点作为拟线谱频率,通过拟线谱频率对应周期的整周期延时叠加突出线谱特征,以提高辐射噪声线谱的检测率.理论分析和对仿真信号的计算结果表明,该算法是有效的.